International Journals

[1]   Improving global ferromagnetic characteristics of laminations by heterogeneous deformation
IEEE Transactions on Energy Conversion, Vol. 36, N°. 3, pages. 1953-1961, 09/2021, URL, Abstract
EL YOUSSEF Mohamad, CLENET Stéphane, VAN GORP Adrien, BENABOU Abdelkader, FAVEROLLE Pierre, MIPO Jean-Claude
[2]   Effect of Industrial Impregnation Process on the Magnetic Properties of Electrical Steels
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 531, 08/2021, URL, Abstract
HELBLING Hugo, BENABOU Abdelkader, VAN GORP Adrien, TOUNZI AbdelmounaĂŻm, EL YOUSSEF Mohamad, BOUGHANMI Walid, LALOY Daniel
[3]   Iron Loss Modeling of Grain Oriented Electrical Steels in FEM Simulation Environment
IEEE Transactions on Magnetics, 07/2021, URL, Abstract
MILLAN MIRABAL Leysmir, MESSAL Oualid, BENABOU Abdelkader, LE MENACH Yvonnick, CHEVALLIER LoĂŻc, KORECKI Julien, ROGER Jean-Yves, DUCREUX Jean-Pierre
[4]   Detection of magnetization loss in a PMSM with Hilbert Huang transform applied to non-invasive search coil voltage
Mathematics and Computers in Simulation, Vol. 184, 06/2021, URL, Abstract
ZHANG Jian, TOUNZI AbdelmounaĂŻm, BENABOU Abdelkader, LE MENACH Yvonnick
[5]   Alternating and Rotational Loss Prediction Accuracy of Vector Jiles-Atherton Model
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 527, 06/2021, URL, Abstract
UPADHAYA Brijesh, RASILO Paavo, PERKKIO Lauri, HANDGRUBER Paul, BENABOU Abdelkader, BELAHCEN Anouar, ARKKIO Antero
[6]   Magnetic ageing investigation of bulk low-carbon silicon steel
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 527, 06/2021, URL, Abstract
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, SHIHAB Sylvain, LE BELLU ARBENZ Laure, MIPO Jean-Claude
[7]   Finite Element Analysis of the Magneto-mechanical Coupling Due to Punching Process in Electrical Steel Sheet
IEEE Transactions on Magnetics, Vol. 57, N°. 6, 06/2021, URL
M'ZALI Nabil, HENNERON Thomas, BENABOU Abdelkader, MARTIN Floran, BELAHCEN Anouar
[8]   Guaranteed Quantity of Interest Error Estimate Based on Equilibrated Flux Reconstruction
IEEE Transactions on Magnetics, Vol. 57, N°. 6, 06/2021, URL, Abstract
TANG Zuqi, LOU Suyang, BENABOU Abdelkader, CREUSE Emmanuel, NICAISE Serge, KORECKI Julien, MIPO Jean-Claude
[9]   Influence of laser powder bed fusion process conditions and resulting microstructures on the electromagnetic properties of a 16MnCr5 steel
Additive Manufacturing, Vol. Volume 41, pages. 101945, 05/2021, URL, Abstract
DUPUY Corinne, BENABOU Abdelkader, SHIHAB Sylvain, MESSAL Oualid, CLENET Stéphane, PEYRE Patrice
[10]   Permanent Magnet Non-linear Demagnetization Model for FEM Simulation Environment
IEEE Transactions on Magnetics, 05/2021, Abstract
BEKIR Wissem, MESSAL Oualid, BENABOU Abdelkader
[11]   Experimental set up for magnetomechanical measurements with a closed flux path sample
Open Physics, Vol. 18, N°. 1, 08/2020, URL, Abstract
EL YOUSSEF Mohamad, VAN GORP Adrien, CLENET Stéphane, BENABOU Abdelkader, FAVEROLLE Pierre, MIPO Jean-Claude
[12]   Linking the differential permeability and loss coefficients in Bertotti’s approach
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 503, 06/2020, URL, Abstract
SHIHAB Sylvain, BENABOU Abdelkader
[13]   Magneto-thermal characterization of bulk forged magnetic steel used in claw pole machine
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 502, 05/2020, URL, Abstract
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, SHIHAB Sylvain, LE BELLU ARBENZ Laure, MIPO Jean-Claude
[14]   Effect on magnetic properties of inhomogeneous compressive stress in thickness direction of an electrical steel stack
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 500, 04/2020, URL, Abstract
HELBLING Hugo, BENABOU Abdelkader, VAN GORP Adrien, EL YOUSSEF Mohamad, TOUNZI AbdelmounaĂŻm, BOUGHANMI Walid, LALOY Daniel
[15]   Determination of stress dependent magnetostriction from a macroscopic magneto-mechanical model and experimental magnetization curves
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 500, 04/2020, URL, Abstract
M'ZALI Nabil, MARTIN Floran, AYDIN Ugur, BELAHCEN Anouar, BENABOU Abdelkader, HENNERON Thomas
[16]   Finite-Element Modeling of Magnetic Properties Degradation Due to Plastic Deformation
IEEE Transactions on Magnetics, Vol. 56, N°. 2, 02/2020, URL, Abstract
M'ZALI Nabil, MARTIN Floran, SUNDARIA Ravi, HENNERON Thomas, BENABOU Abdelkader, BELAHCEN Anouar
[17]   Analysis of the Magneto-Mechanical Anisotropy of Steel Sheets in Electrical Applications
IEEE Transactions on Magnetics, Vol. 56, N°. 2, 02/2020, URL, Abstract
MARTIN Floran, AYDIN Ugur, RUZIBAEV Abubakr, GE Yanling, DANIEL Laurent, BERNARD Laurent, RASILO Paavo, BENABOU Abdelkader, BELAHCEN Anouar
[18]   Punching effect directly on electrical machine stator strips
International Journal of Applied Electromagnetics and Mechanics (IJAEM), Vol. 61, N°. S1, pages. S107-S114, 06/2019, URL, Abstract
EL YOUSSEF Mohamad, BENABOU Abdelkader, COOREVITS Thierry, VAN GORP Adrien, CLENET Stéphane, FAVEROLLE Pierre, MIPO Jean-Claude, LAVALLEY Yannick, LECUPPE Thomas
[19]   Development and validation of an electrical and magnetic characterization device for massive parallelepiped specimens
International Journal of Applied Electromagnetics and Mechanics (IJAEM), Vol. 61, N°. S1, pages. S31-S38, 06/2019, URL, Abstract
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, ARBENZ Laure, MIPO Jean-Claude
[20]   Temperature Dependence in the Jiles-Atherton Model for Non-Oriented Electrical Steels: An Engineering Approach
IEEE Transactions on Magnetics, Vol. 54, N°. 11, 11/2018, URL, Abstract
HUSSAIN Sajid, BENABOU Abdelkader, CLENET Stéphane, LOWTHER David A.
[21]   Characterization of massive magnetic parts with a dedicated device
International Journal of Applied Electromagnetics and Mechanics (IJAEM), Vol. 57, N°. 4, pages. 457-472, 08/2018, URL, Abstract
BORSENBERGER Marc, BENABOU Abdelkader, BAUDOUIN Cyrille, BIGOT RĂ©gis, FAVEROLLE Pierre, MIPO Jean-Claude
[22]   Thin grain oriented electrical steel for PWM voltages fed magnetic cores
AIP Advances, Vol. 8, N°. 047611, 04/2018, URL, Abstract
BELGRAND Thierry, LEMAITRE RĂ©gis, BENABOU Abdelkader, BLASZKOWSKI Jonathan, WANG Chaoyong
[23]   Iron Loss Calculation in a Synchronous Generator Using Finite Element Analysis
IEEE Transactions on Energy Conversion, Vol. 32, N°. 2, pages. 640 - 648, 06/2017, URL, Abstract
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[24]   Computation of Magnetic Forces Using Degenerated Airgap Element
IEEE Transactions on Magnetics, Vol. 53, N°. 6, pages. 7401304, 06/2017, URL, Abstract
SATHYAN Sabin, BELAHCEN Anouar, JUHANI Kataya, HENROTTE François, BENABOU Abdelkader, LE MENACH Yvonnick
[25]   Stray load losses analysis of cage induction motor using 3-D finite element method with external circuit coupling
IEEE Transactions on Magnetics, Vol. 53, N°. 6, pages. 8202104, 06/2017, URL, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[26]   Characterization of the Local Incremental Permeability of a Ferromagnetic Plate Based on a Four Needles Technique
IEEE Transactions on Magnetics, Vol. 53, N°. 3, 03/2017, URL, Abstract
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre
[27]   Dynamic hysteresis modeling including skin effect using diffusion equation model
Journal of Magnetism and Magnetic Materials (JMMM), Vol. 410, pages. 137-143, 07/2016, URL, Abstract
HAMADA Souad, LOUAI Fatima Zohra, NAIT-SAID Nasreddine, BENABOU Abdelkader
[28]   High Frequency Behavioral Ring Core Inductor Model
IEEE Transactions on Power Electronics, Vol. 31, N°. 5, pages. 3763 - 3772, 05/2016, Abstract
CUELLAR Carlos, IDIR Nadir, BENABOU Abdelkader
[29]   Finite Element Implementation and Experimental Validation of 2-D/3-D Magnetic Force Formulas
IEEE Transactions on Magnetics, Vol. 52, N°. 2, 03/2016, URL, Abstract
BOUGHANMI Walid, HENROTTE François, BENABOU Abdelkader, LE MENACH Yvonnick
[30]   Characterization of the local electrical properties of electrical machine parts with non-trivial geometry
International Journal of Applied Electromagnetics and Mechanics (IJAEM), Vol. 48, N°. 2-3, pages. 201-206, 06/2015
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre
[31]   End-Region Leakage Fluxes and Losses Analysis of Cage Induction Motors Using 3-D Finite-Element Method
IEEE Transactions on Magnetics, Vol. 51, N°. 3, 04/2015, URL, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime, CHEVALLIER LoĂŻc, HENNERON Thomas
[32]   High frequency current probes for common-mode impedance measurements of power converters under operating conditions
EPE Journal, Vol. 24, N°. 4, pages. 48-55, 12/2014, URL, Abstract
CUELLAR Carlos, IDIR Nadir, BENABOU Abdelkader, MARGUERON Xavier
[33]   Characterization and modeling of hysteresis for magnetic materials used in EMI filters of power converters
IEEE Transactions on Power Electronics, Vol. 29, N°. 9, pages. 4911-4920, 09/2014, Abstract
CUELLAR Carlos, BENABOU Abdelkader, IDIR Nadir
[34]   A Combined Experimental and Finite Element Analysis Method for the Estimation of Eddy-Current Loss in NdFeB Magnets
Sensors, Vol. 14, N°. 5, pages. 8505-8512, 05/2014, URL, Abstract
FRATILA Radu, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, MIPO Jean-Claude
[35]   Calculation of iron loss in Solid Rotor Induction Machine using FEM
IEEE Transactions on Magnetics, Vol. 50, N°. 2, 02/2014
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[36]   Stochastic Jiles-Atherton model accounting for soft magnetic material variability
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 32, N°. 5, pages. 1679 - 1691, 10/2013, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[37]   Improved iron loss calculation for non-centered minor loops
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 32, N°. 4, 07/2013
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[38]   Stochastic post processing calculation of iron losses -Application to a PMSM
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 32, N°. 4, 07/2013
FRATILA Mircea, RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane, TOUNZI Abdelmounaïm
[39]   Stochastic modeling of anhysteretic magnetic curve using random inter-dependant coefficients
International Journal of Applied Electromagnetics and Mechanics (IJAEM), Vol. 43, N°. 1-2, pages. 151-159, 07/2013, URL, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[40]   Analytical modeling to predict the cutting behavior of ferromagnetic steels: A coupled magnetic–mechanical approach
International Journal of Solids and Structures, Vol. 50, N°. 13, pages. 2078-2086, 06/2013
MKADDEM Ali, BENABOU Abdelkader, EL MANSORI Mohamed, CLENET Stéphane
[41]   Nonlinear Proper Generalized Decomposition Method Applied to the Magnetic Simulation of a SMC Microstructure
IEEE Transactions on Magnetics, Vol. 48, N°. 11, 11/2012
HENNERON Thomas, BENABOU Abdelkader, CLENET Stéphane
[42]   Nonlinear Modeling of Magnetization Loss in Permanent Magnets
IEEE Transactions on Magnetics, Vol. 48, N°. 11, pages. 4, 11/2012, URL, Abstract
FRATILA Radu, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, MIPO Jean-Claude
[43]   Stochastic Modeling of Soft Magnetic Properties of Electrical Steels: Application to Stators of Electrical Machines
IEEE Transactions on Magnetics, Vol. 48, N°. 10, pages. 2573 - 2584, 10/2012, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[44]   Interlaminar short circuit detection: modeling and measurement
Compel, Vol. 31, N°. 5, 08/2012, Abstract
MÜLLER Juliana-Luisa, ROMARY RaphaĂ«l, BENABOU Abdelkader, HENNERON Thomas, PIRIOU Francis, BASTOS JoĂŁo Pedro Assumpção, ROGER Jean-Yves
[45]   Experimental Characterization of the Iron Losses Variability in Stators of Electrical Machines
IEEE Transactions on Magnetics, Vol. 48, N°. 4, pages. 1629-1632, 04/2012, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[46]   Adaptive method for non-intrusive spectral projection application on a stochastic eddy current NDT problem
IEEE Transactions on Magnetics, Vol. 48, N°. 2, pages. 759-762, 02/2012, Abstract
BEDDEK Karim, CLENET Stéphane, MOREAU Olivier, COSTAN Valentin, LE MENACH Yvonnick, BENABOU Abdelkader
[47]   Stochastic Modeling of the Pull-In Voltage in a MEMS Beam Structure
IEEE Transactions on Magnetics, Vol. 47, N°. 5, pages. 974-977, 05/2011, URL, Abstract
BOLONI Francisc, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[48]   Evaluation of the Perturbation Method for Iterative Calculations in 2D Finite Element Analysis
Studies in Applied Electromagnetics and Mechanics : Computer Field Models of Electromagnetic Devices, Vol. 34, pages. 285-291, 11/2010, URL, Abstract
DAUSSY Benoit, LAVAL Damien, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[49]   Finite Element Modeling of the Hysteresis Effect in a Magnetorheological Brake
Studies in Applied Electromagnetics and Mechanics : Computer Field Models of Electromagnetic Devices, Vol. 34, pages. 756-762, 11/2010, URL, Abstract
DEMERSSEMAN Richard, BENABOU Abdelkader, CLENET Stéphane, LEMAIRE-SEMAIL Betty
[50]   Hysteresis Phenomenon Implementation in FIT: Validation with Measurements
IEEE Transactions on Magnetics, Vol. 46, N°. 8, pages. 3285-3288, 08/2010, URL, Abstract
KORECKI Julien, BENABOU Abdelkader, LE MENACH Yvonnick, DUCREUX Jean-Pierre, PIRIOU Francis
[51]   Transformer Inrush Currents Taking Into Account Vector Hysteresis
IEEE Transactions on Magnetics, Vol. 46, N°. 8, pages. 3237-3240, 08/2010, URL, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson
[52]   Three-Phase Transformer Modelling Using the Vector Hysteresis Model and Including the Eddy Current and the Anomalous Losses
IEEE Transactions on Magnetics, Vol. 46, N°. 8, pages. 3201-3204, 08/2010, URL, Abstract
FERREIRA DA LUZ Mauricio Valencia, LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson
[53]   Comparison of pull-in voltage in MEMS using 3D FEM and analytical approach
International Journal for Computation and Mathematics in Electrical Engineering (COMPEL), Vol. 29, N°. 6, 05/2010, Abstract
BOLONI Francisc, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[54]   Minor Loops Calculation with a Modified Jiles-Atherton Hysteresis Model
Journal of Microwaves, Optoelectronics and Electromagnetic Applications, Vol. 8, N°. 1, 06/2009, Abstract
LEITE Jean Vianei, SADOWSKI Nelson, KUO-PENG Patrick, BENABOU Abdelkader
[55]   Finite Element Three-Phase Transformer Modeling Taking Into Account a Vector Hysteresis Model
IEEE Transactions on Magnetics, Vol. 45, N°. 3, pages. 1716-1719, 03/2009, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, FERREIRA DA LUZ Mauricio Valencia
[56]   Electromagnetic modelling of short circuited coreplates
The international Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 28, N°. 3, pages. 762-771, 02/2009, URL, Abstract
ROGER Jean-Yves, VRIGNAUD Emmanuel, HENNERON Thomas, BENABOU Abdelkader, DUCREUX Jean-Pierre
[57]   Accurate minor loops calculation with a modified Jiles-Atherton hysteresis model
The international Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 28, N°. 3, pages. 741-749, 02/2009, URL, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson
[58]   Minor loops modelling with a modified Jiles-Atherton model and comparison with the Preisach model
Journal of Magnetism and Magnetic Materials, Vol. 320, N°. 20, pages. e1034-e1038, 10/2008, Abstract
BENABOU Abdelkader, LEITE Jean Vianei, CLENET Stéphane, SIMAO C., SADOWSKI Nelson
[59]   Implementation of a Vector Hysteresis Model in 2D Finite Element Analysis: Study of a RSST with Anisotropic Sample
International Journal of Applied Electromagnetics and Mechanics, Vol. 28, N°. 1-2, pages. 41-47, 09/2008, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, LE MENACH Yvonnick, CLENET Stéphane
[60]   Implementation of an Anisotropic Vector Hysteresis Model In a 3D Finite Element Code
IEEE Transactions on Magnetics, Vol. 44, N°. 6, pages. 918-921, 06/2008, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, CLENET Stéphane, BASTOS João Pedro Assumpção, PIRIOU Francis
[61]   Permanent magnets modelling for dynamic applications
Journal of Magnetism and Magnetic Materials, Vol. 320, N°. 6, pages. 830-835, 03/2008, Abstract
BENABOU Abdelkader, GEORGES Samuel, CLENET Stéphane
[62]   Analysis of a rotational single sheet tester using 3D Finite Element model taking into account hysteresis effect
The international Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 26, N°. 4, pages. 1037-1048, 08/2007, URL, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, DA SILVA Pedro Armando, SADOWSKI Nelson, HENNERON Thomas, CLENET Stéphane, KUO-PENG Patrick, PIRIOU Francis, BATISTELA N.J.
[63]   Inclusion of a stress-dependent Preisach model in 2D FE calculations
The international Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 25, N°. 1, pages. 81 - 90, 02/2006, URL, Abstract
BENABOU Abdelkader, VANDENBOSSCHE Lode, GYSELINCK Johan, CLENET Stéphane, DUPRE Luc, DULAR Patrick
[64]   Modelling of a hysteresis motor using the Jiles-Atherton model
European Physical Journal Applied Physics, Vol. 29, N°. 3, pages. 259-265, 03/2005, URL, Abstract
BENABOU Abdelkader, BOUAZIZ Lounas, CLENET Stéphane
[65]   Comparison of the Preisach and Jiles-Atherton models to take hysteresis phenomenon into account in Finite Element Analysis
The international Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 23, N°. 3, pages. 825 - 834, 09/2004, URL, Abstract
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[66]   Adaptation of the Frequency Dependent Jiles-Atherton Model with B as entry variable
International Journal of Applied Electromagnetics and Mechanics, Vol. 19, N°. 1-4, pages. 187 - 191, 06/2004, URL, Abstract
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[67]   Comparison of Preisach and Jiles–Atherton models to take into account hysteresis phenomenon for finite element analysis
Journal of Magnetism and Magnetic Materials, Vol. 261, N°. 1-2, pages. 139-160, 04/2003, URL, Abstract
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[68]   3D Finite Element Analysis Of The Demagnetizing Field In Epstein Strips Of Grain Oriented Electrical Steels
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), A paraĂźtre, Abstract
MILLAN MIRABAL Leysmir, MESSAL Oualid, BENABOU Abdelkader, LE MENACH Yvonnick, CHEVALLIER LoĂŻc, ROGER Jean-Yves, DUCREUX Jean-Pierre

International Conferences and Symposiums

[1]   3D Finite Element Analysis Of The Demagnetizing Field In Epstein Strips Of Grain Oriented Electrical Steels
EPNC 2021, Torino, Italy, 04/2021, Abstract
MILLAN MIRABAL Leysmir, MESSAL Oualid, BENABOU Abdelkader, LE MENACH Yvonnick, ROGER Jean-Yves, DUCREUX Jean-Pierre
[2]   Iron Loss Modeling of Anisotropic Soft Magnetic Steels in FEM Simulation Environment
Intermag 2021, Lyon, France, 04/2021
MILLAN MIRABAL Leysmir, MESSAL Oualid, BENABOU Abdelkader, LE MENACH Yvonnick, ROGER Jean-Yves, DUCREUX Jean-Pierre
[3]   Finite Element Analysis of a Magneto-mechanical Coupling Due to Punching Process in Electrical Steel Sheet
CEFC 2020, Piza, Italy, 11/2020
M'ZALI Nabil, HENNERON Thomas, BENABOU Abdelkader, MARTIN Floran, BELAHCEN Anouar
[4]   Guaranteed Quantity Of Interest Error Estimate Based On Equilibrated Flux Reconstruction
CEFC 2020, Piza, Italy, 11/2020, 11/2020
TANG Zuqi, LOU Suyang, BENABOU Abdelkader, CREUSE Emmanuel, NICAISE Serge, KORECKI Julien, MIPO Jean-Claude
[5]   Effect on magnetic properties of inhomogeneous compressive stress in thickness direction of an electrical steel stack
SMM 2019, Poznan, Poland, 09/2019
HELBLING Hugo, BENABOU Abdelkader, VAN GORP Adrien, EL YOUSSEF Mohamad, TOUNZI AbdelmounaĂŻm, BOUGHANMI Walid, LALOY Daniel
[6]   Linking the differential permeability and loss coefficients
SMM 2019, Poznan, Poland, 09/2019
SHIHAB Sylvain, BENABOU Abdelkader
[7]   Magneto thermic characterization of forged steel used in claw pole machine
SMM 2019, Poznan, Poland, 09/2019
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, LE BELLU ARBENZ Laure, MIPO Jean-Claude, SHIHAB Sylvain
[8]   Determination of stress dependent magnetostriction from a macroscopic magneto-mechanical model and experimental magnetization curves
SMM 2019, Poznan, Poland, 09/2019
M'ZALI Nabil, MARTIN Floran, AYDIN Ugur, BELAHCEN Anouar, BENABOU Abdelkader, HENNERON Thomas
[9]   Experimental set up for magneto mechanical measurements with a close flux path sample
ISEF 2019, Nancy, France, 08/2019, Abstract
EL YOUSSEF Mohamad, VAN GORP Adrien, CLENET Stéphane, BENABOU Abdelkader, MIPO Jean-Claude, FAVEROLLE Pierre
[10]   Finite Element Modeling of Magnetic Properties Degradation Due to Plastic Deformation
COMPUMAG 2019, Paris, France, 07/2019, Abstract
M'ZALI Nabil, HENNERON Thomas, BENABOU Abdelkader, MARTIN Floran, BELAHCEN Anouar, SUNDARIA Ravi
[11]   Analysis of the magneto-mechanical anisotropy of steel sheets in electrical applications
COMPUMAG 2019, Paris, France, 07/2019, Abstract
MARTIN Floran, AYDIN Ugur, RUZIBAEV Abubakr, GE Yanling, DANIEL Laurent, BERNARD Laurent, RASILO Paavo, BENABOU Abdelkader, BELAHCEN Anouar
[12]   Comparison of different meta-model techniques for torque optimization constrained by mechanical strength in automotive high-speed Spoke-type IPM machine
COMPUMAG 2019, Paris, France, 07/2019, Abstract
HUANG Xiaoyu, OUISSE Morvan, BENABOU Abdelkader, BAHRI Raouaa, MIPO Jean-Claude
[13]   Detection of magnetization loss in a PMSM with Hilbert Huang transform applied to non-invasive search coil voltage
ELECTRIMACS 2019, Salerno, Italy, 05/2019, Abstract
ZHANG Jian, TOUNZI AbdelmounaĂŻm, BENABOU Abdelkader, LE MENACH Yvonnick
[14]   Calibration of a Miniature Single Sheet Tester with Guaranteed FE-simulation
CEFC 2018, Hangzhou, China, 10/2018
TANG Zuqi, BENABOU Abdelkader, ZHAO Yanpu
[15]   Electrical and magnetic characterization of parallelepipedic sample extracted from massive claw poles alternator
2dm 2018, Grenoble - France, 09/2018
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, ARBENZ Laure, MIPO Jean-Claude
[16]   The effect of punching on electrical machine
2dm 2018, Grenoble - France, 09/2018
EL YOUSSEF Mohamad, BENABOU Abdelkader, VAN GORP Adrien, CLENET Stéphane, FAVEROLLE Pierre, MIPO Jean-Claude, LAVALLEY Yannick, LECUPPE Thomas
[17]   Physical interpretation of the core-loss coefficient variation at different flux density
EMF 2018, Darmstadt - Allemagne, 04/2018
SHIHAB Sylvain, BENABOU Abdelkader
[18]   Thin Grain Oriented Electrical Steel for PWM voltages fed magnetic cores
SMM 2017, SĂ©ville, Espagne, 09/2017
BELGRAND Thierry, LEMAITRE RĂ©gis, BENABOU Abdelkader, BLASZKOWSKI Jonathan, WANG Chaoyong
[19]   Slinky stator: The impact of manufacturing process on the magnetic properties
IEMDC, Miami, USA, 05/2017, URL, Abstract
EL YOUSSEF Mohamad, VAN GORP Adrien, CLENET Stéphane, BENABOU Abdelkader, FAVEROLLE Pierre, MIPO Jean-Claude, LAVALLEY Yannick, COUR Christiane, LECUPPE Thomas
[20]   Stray load losses analysis of cage induction motor using 3-D finite element method with external circuit coupling
CEFC 2016, Miami - Etats-Unis, 11/2016, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[21]   Computation of Magnetic Forces Using Degenerated Airgap Element
CEFC 2016, Miami - Etats-Unis, 11/2016, Abstract
SATHYAN Sabin, BELAHCEN Anouar, JUHANI Kataya, HENROTTE François, BENABOU Abdelkader, LE MENACH Yvonnick
[22]   A study of the effects of temperature on magnetic and copper losses in electrical machines
ICEM 2016, Lausanne - Switzerland, 09/2016, Abstract
HUSSAIN Sajid, GHORBANIAN Vahid, BENABOU Abdelkader, CLENET Stéphane, LOWTHER David A.
[23]   Specific Magnetic Characterization for Massive Magnetic Parts using an Electromagnet Device
IGTE 2016, Graz - Autriche, 09/2016, Abstract
BORSENBERGER Marc, BENABOU Abdelkader, BAUDOUIN Cyrille, BIGOT RĂ©gis, FAVEROLLE Pierre, MIPO Jean-Claude
[24]   Prediction of B-H Loops in Electrical Steels at Different Temperatures Using Jiles-Atherton Model
EMF 2016, Lyon - France, 04/2016, Abstract
HUSSAIN Sajid, BENABOU Abdelkader, CLENET Stéphane, LOWTHER David A.
[25]   Methodology for the analysis of the impact of the forging parameters on metallurgy and mechanical properties in case of solid electromagnetic manufactured parts.
ESAFORM 2016, Nantes, 04/2016, URL, Abstract
BORSENBERGER Marc, BAUDOUIN Cyrille, BENABOU Abdelkader, BIGOT RĂ©gis, FAVEROLLE Pierre, MIPO Jean-Claude
[26]   Loss analysis of surface-mounted permanent magnet synchronous motor due to carrier harmonics using 3-D FEM
International symposium on electromagnetic fields (ISEF), 09/2015, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[27]   Characterization of the local incremental permeability of a ferromagnetic plate based on a four needles technique
SMM 2015, Sao Paulo, Brésil, 09/2015
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre
[28]   Iron loss computation of a hybrid excitation synchronous generator
ISEF 2015, Valence, Espagne, 09/2015
PLOYARD Maxime, AMMAR Aymen, IAMAMURA Juliana, ILEA Dan, GILLON Frédéric, BENABOU Abdelkader
[29]   High Frequency Model of Ferrite and Nanocrystalline Ring Core Inductors
17th European conference on power electronics and applications (EPE 2015), 09/2015, Abstract
CUELLAR Carlos, IDIR Nadir, BENABOU Abdelkader
[30]   Iron loss evaluation on a hybrid synchronous generator using FEM
Compumag 2015, Montreal, Canada, 07/2015
IAMAMURA Juliana, PLOYARD Maxime, GILLON Frédéric, BENABOU Abdelkader, LALOY Daniel, AMMAR Aymen
[31]   Eddy current computation in 2D-FEM for permanent magnet loss calculation
Compumag 2015, Montreal, Canada, 07/2015
BOUGHANMI Walid, HENNERON Thomas, BENABOU Abdelkader, TOUNZI Abdelmounaïm, ZAÏM Mohamed El Hadi
[32]   Finite Element Implementation and Experimental Validation of 2D/3D Magnetic Force formulae
Compumag 2015, Montreal, Canada, 07/2015
BOUGHANMI Walid, HENROTTE François, BENABOU Abdelkader, LE MENACH Yvonnick
[33]   Finite-Element Investigation on Zig-Zag Flux in Squirrel Cage Induction Machines
International Conference on Electrical Machines (ICEM2014), 09/2014, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[34]   Characterization of the local electrical properties of electrical machine parts with non-trivial geometry
2dm, Turin, Italy, 09/2014
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre
[35]   End-region leakage fluxes and losses analysis of cage induction motors using 3-D finite element method
Conference on Electromagnetic field computation (CEFC 2014), 05/2014, Abstract
CHEAYTANI Jalal, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[36]   High frequency current probes for common-mode impedance measurements of power converters under operating conditions
EPE'13-ECCE Europe, the 15th European Conference on Power Electronics and Applications, 09/2013, URL, Abstract
CUELLAR Carlos, IDIR Nadir, BENABOU Abdelkader, MARGUERON Xavier
[37]   Calculation and measurement of eddy-current loss in NdFeB Magnet
ISEF, Ohrid, Macedonia, 09/2013, Abstract
FRATILA Radu, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, MIPO Jean-Claude
[38]   Nonlinear magnetization loss in sintered NdFeB magnet due to eddy current heat dissipation
Compumag 2013, Budapest, Hungary, 07/2013, Abstract
FRATILA Radu, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, MIPO Jean-Claude
[39]   Calculation of Iron loss in Solid Rotor Induction Machine using FEM
Compumag 2013, Budapest, Hungary, 07/2013, Abstract
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[40]   Impact of the material and geometry uncertainties on the pull-in voltage in a MEMS beam structure
OIPE 2012, Ghant, 09/2012, Abstract
BENABOU Abdelkader, BOLONI Francisc, TOUNZI Abdelmounaïm, CLENET Stéphane
[41]   Stochastic modeling of anhysteretic magnetic curves using random inter-dependant coefficients
OIPE 2012, Ghant, 09/2012, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[42]   Stochastic Jiles-Atherton model accounting for soft magnetic material variability
IGTE 2012, Graz Austria, 09/2012, Abstract
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[43]   Improved iron loss calculation for non-centered minor loops
EPNC 2012, Croatie, Pula, 06/2012, Abstract
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[44]   Stochastic post processing calculation of iron losses -Application to a PMSM
EPNC 2012, Croatie, Pula, 06/2012, Abstract
FRATILA Mircea, RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane, TOUNZI Abdelmounaïm
[45]   Proper Generalized Decomposition method applied to the magnetic simulation of a SMC microstructure
INTERMAG2012, 05/2012
HENNERON Thomas, BENABOU Abdelkader, CLENET Stéphane
[46]   Measurement Method of the Complex Magnetic Permeability of Ferrites in High Frequency
2012 IEEE Instrumentation and Measurement Technology Conference I2MTC12,, 05/2012, URL, Abstract
CUELLAR Carlos, TAN Wenhua, MARGUERON Xavier, BENABOU Abdelkader, IDIR Nadir
[47]   Non-linear modeling of magnetization loss in permanent magnets
Intermag 2012, Vancouver, Canada, 05/2012, Abstract
FRATILA Radu, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, MIPO Jean-Claude
[48]   Interlaminar short-circuit detection: modeling of the El Cid test and comparison with the experiment
ISEF 2011 Madeira, Portugal, 09/2011, Abstract
MÜLLER Juliana-Luisa, ROMARY RaphaĂ«l, BENABOU Abdelkader, HENNERON Thomas, PIRIOU Francis, BASTOS JoĂŁo Pedro Assumpção, ROGER Jean-Yves
[49]   Determination of the electrical conductivity and magnetic permeability of magnetic powders
ISEF’2011, 09/2011
BENABOU Abdelkader, JIMENEZ Ayensa, CLENET Stéphane, MOREAU Olivier
[50]   Influence of the manufacturing process on magnetic properties of claw pole generator stators: B-H curve variability measurements
ISEM 2011, 09/2011
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane
[51]   Investigation of the Numerical Error Influence in a 3D FE Post-Processing Iron Loss Calculation Procedure
ISEM2011 Napoli, Italy, pages. 229-230, 09/2011, Abstract
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, RAMAROTAFIKA Rindra, DESSOUDE Maxime
[52]   Investigation of the impact of rotational losses in a three-phase transformer
ISEF 2011 Madeira, Portugal, 09/2011, Abstract
FRATILA Mircea, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm, DESSOUDE Maxime
[53]   3D FE Modelling of Interlamination Short-circuits Taking into Account the Building Bar
COMPUMAG 2011 Sydney, Australie, 07/2011, Abstract
MÜLLER Juliana-Luisa, BENABOU Abdelkader, HENNERON Thomas, PIRIOU Francis, BASTOS João Pedro Assumpção, ROGER Jean-Yves
[54]   Proper adaptive method for Non intrusive Spectral Projection – Application on Eddy Current Non Destructive Testing
COMPUMAG 2011, 07/2011
BEDDEK Karim, CLENET Stéphane, MOREAU Olivier, COSTAN Valentin, LE MENACH Yvonnick, BENABOU Abdelkader
[55]   Experimental characterization of the iron losses variability in stators of electrical machines
SMM, Kos Greece, 04/2011
RAMAROTAFIKA Rindra, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude
[56]   Non-Linear Analytical Model of a Three Phase Transformer Based on 2D-FEM Identification of its Reluctances
EPNC 2010, Essen, Allemagne, 06/2010, Abstract
FRATILA Mircea, BENABOU Abdelkader, HENNERON Thomas
[57]   Statistical modeling of an anisotropic lamination stack
CEFC 2010, Chicago, 05/2010, Abstract
JARRAH Adil, CLENET Stéphane, BENABOU Abdelkader, RAMAROTAFIKA Rindra
[58]   Stochastic Modeling of the Pull-In Voltage in a MEMS Beam Structure
CEFC 2010, Chicago, USA, 01/2010
BOLONI Francisc, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[59]   Study of Different FEM Models to Analyze Homogenized Iron Lamination with Electrical Fault
Compumag 2009, Florianopolis, Brésil, 11/2009, Abstract
MÜLLER Juliana-Luisa, BENABOU Abdelkader, HENNERON Thomas, PIRIOU Francis, BASTOS João Pedro Assumpção, ROGER Jean-Yves
[60]   Force Computation in a MEMS Structure Using Adaptive Mesh Refinement
Compumag 2009, Florianopolis, Brésil, 11/2009
BOLONI Francisc, BENABOU Abdelkader, KREBS Guillaume, TOUNZI AbdelmounaĂŻm
[61]   Evaluation of the perturbation method for iterative calculations in 2D finite element analysis
Conférence ISEF 2009, Arras, France, 09/2009, Abstract
DAUSSY Benoit, LAVAL Damien, BENABOU Abdelkader, TOUNZI AbdelmounaĂŻm
[62]   Comparison between the Preisach model and a modified Jiles-Atherton hysteresis model for the minor loops representation
NUMELEC’08, Liùge, Belgique, 12/2008
LEITE Jean Vianei, SADOWSKI Nelson, BENABOU Abdelkader
[63]   Calculation of the force exerted on an object penetrating a ferrofluid
EPNC 2008, Lille, France, 07/2008
BENABOU Abdelkader, CLENET Stéphane
[64]   Accurate minor loops calculation with a modified Jiles-Atherton hysteresis model
EPNC 2008, Lille, France, 07/2008, Abstract
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson
[65]   Finite Element Three-Phase Transformer Modeling Taking into Account a Vector Hysteresis Model
CEFC 2008, Athen, Greece, 05/2008
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, LUZ Mauricio V.
[66]   Measurement of magnetic losses in soft magnetic materials with harmonic induction
SMM 2007, Cardiff, 09/2007
CYR Charles, LOCMENT Fabrice, CLENET Stéphane, BENABOU Abdelkader, VIAROUGE Philippe
[67]   Implementation of a Vector Hysteresis Model in 2D Finite Element Analysis: Study of a RSST with Anisotropic Sample
ISEM 2007, Michigan, USA, 09/2007
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, LE MENACH Yvonnick, CLENET Stéphane, DA SILVA Pedro Armando
[68]   Minor loops modelling with a modified Jiles-Atherton model and comparison with the Preisach Model
SMM 2007, Cardiff, United Kingdom, 09/2007
BENABOU Abdelkader, LEITE Jean Vianei, CLENET Stéphane, SIMAO C., SADOWSKI Nelson
[69]   Implementation of an Anisotropic Vector Hysteresis Model In a 3D Finite Element Code
Compumag 2007, Aachen, Germany, 07/2007
LEITE Jean Vianei, BENABOU Abdelkader, SADOWSKI Nelson, CLENET Stéphane, BASTOS João Pedro Assumpção, PIRIOU Francis
[70]   Improvements in Jiles-Atherton Hysteresis Model to Take into Account Minor Loops
HMM 2007, Naples, 06/2007, URL
LEITE Jean Vianei, BENABOU Abdelkader, SIMAO C., SADOWSKI Nelson
[71]   Study of Magnetic Induction Measurement Techniques in Rotational Single Sheet Tester
Compumag 2007, Aachen, 06/2007
DA SILVA Pedro Armando, SADOWSKI Nelson, BENABOU Abdelkader, BATISTELA N.J., BASTOS João Pedro Assumpção, CLENET Stéphane, PIRIOU Francis
[72]   Analysis of the shielding sheet distance influence in rotational single sheet tester
NUMELEC’06, Lille, France, 12/2006, Abstract
DA SILVA Pedro Armando, BENABOU Abdelkader, BATISTELA N.J., CLENET Stéphane, SADOWSKI Nelson, BASTOS João Pedro Assumpção
[73]   Analysis of a rotational single sheet tester using 3d finite element model taking into account hysteresis effect
EPNC 2006, Maribor, Slovenia, 06/2006
LEITE Jean Vianei, BENABOU Abdelkader, DA SILVA Pedro Armando, SADOWSKI Nelson, HENNERON Thomas, CLENET Stéphane, KUO-PENG Patrick, PIRIOU Francis, BATISTELA N.J.
[74]   Inclusion of a stress-dependent Preisach model in 2D FE calculations
EPNC 2004, Poznan, Poland, 06/2004
BENABOU Abdelkader, VANDENBOSSCHE Lode, GYSELINCK Johan, CLENET Stéphane, DUPRE Luc, DULAR Patrick
[75]   Experimental determination of SMC material conductivity
Proc. of EMF 2003, Aachen, Allemagne, 10/2003
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[76]   Adaptation of the Frequency Dependent Jiles-Atherton Model with B as entry variable
ISEM 2003, Versailles, France, 05/2003
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[77]   Comparison of the Preisach and Jiles-Atherton models to take hysteresis phenomenon into account in Finite Element Analysis
EPNC 2002, Leuven, Belgium, 07/2002
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis

National Conferences and Symposiums

[1]   Computer-Aided Measurement method of Hysteresis Loop based on Convolution Neural Network
SGE 2021, Nantes, France, 07/2021, Abstract
GONG Ruohan, BENABOU Abdelkader, TANG Zuqi
[2]   Effet de la tempĂ©rature de fonctionnement sur le comportement Ă©lectromagnĂ©tique d’un noyau magnĂ©tique massif
SGE 2021, Nantes, France, 07/2021
JAMIL Meryeme, BENABOU Abdelkader, CLENET Stéphane, LE BELLU ARBENZ Laure, MIPO Jean-Claude
[3]   Etude expĂ©rimentale de l’effet du compactage hĂ©tĂ©rogĂšne sur les propriĂ©tĂ©s d’un circuit magnĂ©tique
SGE 2021, Nantes, France, 07/2021
HELBLING Hugo, BENABOU Abdelkader, VAN GORP Adrien, EL YOUSSEF Mohamad, TOUNZI AbdelmounaĂŻm, BOUGHANMI Walid, LALOY Daniel
[4]   Effets de la taille de grain et de la déformation plastique sur un acier magnétique massif
Symposium de GĂ©nie Electrique (SGE 2018), Nancy - France, 07/2018, Abstract
BORSENBERGER Marc, BENABOU Abdelkader, SHIHAB Sylvain, BAUDOUIN Cyrille, BIGOT RĂ©gis, FAVEROLLE Pierre, MIPO Jean-Claude
[5]   Etude par Ă©lĂ©ments finis de la mĂ©thode des quatre pointes pour la caractĂ©risation des propriĂ©tĂ©s Ă©lectromagnĂ©tiques d’une plaque Ă©paisse
Numelec 2015, Saint-Nazaire, France, 06/2015
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre
[6]   Détermination des pertes harmoniques dans les aimants permanents. Cas des machines synchrones à aimants déposés
Numelec 2015, Saint-Nazaire, France, 06/2015
ZAÏM Mohamed El Hadi, BOUGHANMI Walid, BENABOU Abdelkader, TOUNZI Abdelmounaïm, DANG T.N.L.
[7]   Approche combinĂ©e expĂ©rimentale/numĂ©rique pour la mesure de la conductivitĂ© Ă©lectrique locale avec minimisation de l’incertitude de mesure
Symposium de GĂ©nie Electrique (SGE 2014), Cachan, France, 07/2014, Abstract
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, COOREVITS Thierry, MIPO Jean-Claude, FAVEROLLE Pierre
[8]   DĂ©termination de la loi de comportement macroscopique des SMC Ă  partir d’imagerie au MEB : Ă©tude de l’influence des conditions d’observation
MGE 2010, Montpellier, France, 08/2010
CAPELLAN-PEREZ Inigo, BENABOU Abdelkader, GUILLEMOT Gildas, CLENET Stéphane
[9]   Détermination de la contrainte seuil dans un liquide magnétorhéologique à l'aide d'un modÚle EF 3D
MGE 2008, Toulouse, France, 05/2008
BENABOU Abdelkader, CLENET Stéphane, NA W.
[10]   ModĂ©lisation par Ă©lĂ©ments finis de capteurs de flux pour la caractĂ©risation de l’hystĂ©rĂ©sis en champ tournant
Proc. of MGE 2005, Lyon, France, 12/2005
BENABOU Abdelkader, HENNERON Thomas, CLENET Stéphane, PIRIOU Francis
[11]   ModĂ©lisation de l’hystĂ©rĂ©sis magnĂ©tique des aciers Ă©lectriques sous contrainte mĂ©canique
Proc. of EF 2003, Gif-sur-Yvette, France, 12/2003
BENABOU Abdelkader, BERNARD Yves, OSSART Florence
[12]   ModĂ©lisation de l’hystĂ©rĂ©sis magnĂ©tique : Ă©tude d’un modĂšle atomique pour la description du ferromagnĂ©tisme
Proc. of JCGE 2003, Saint-Nazaire, France, 06/2003
BENABOU Abdelkader
[13]   Etude de modĂšles d’hystĂ©rĂ©sis dynamiques en vue d’une implantation dans un code de calcul ElĂ©ments Finis
Proc. of MGE 2003, Grenoble, France, 04/2003
BENABOU Abdelkader, CLENET Stéphane, PIRIOU Francis
[14]   Identification et optimisation des paramĂštres du modĂšle de Jiles-Atherton pour la modĂ©lisation de l’hystĂ©rĂ©sis magnĂ©tique
Proc. of JCGE 2001, Nancy, France, 11/2001
BENABOU Abdelkader

Other Publications

[1]   CaractĂ©risation et ModĂ©lisation de l’HystĂ©rĂ©sis Scalaire Statique: Implantation dans un Code de Calcul ElĂ©ments Finis
GDR Sûreté et Disponibilité des SystÚmes Electrotechniques, 06/2001, Abstract
AHMADA B., ALVES F., BEN ABDALLAH B., BENABOU Abdelkader, BERNARD Yves, BOUILLAULT Frédéric, CHABRERIE Jean-Pierre, CLENET Stéphane, FELIACHI Mouloud, LEBOUC Afef, MASSON Jean-Pierre, MENDES E, MEUNIER Gérard, NOURDINE Amir, OULED AMOR Yassine, PIRIOU Francis, SEGUI Yvan

Pattents

[1]   Procédé et dispositif de mesure non destructif et local des propriétés électromagnétiques d'un matériau magnétique
Brevet, N° de Brevet. FR3040491, 03/2017, URL, Abstract
ARBENZ Laure, BENABOU Abdelkader, CLENET Stéphane, MIPO Jean-Claude, FAVEROLLE Pierre

HdR (accreditation to supervise research)

[1]   CaractĂ©risation et modĂ©lisation des matĂ©riaux magnĂ©tiques pour les dispositifs de conversion Ă©lectromagnĂ©tique de l’énergie
HDR de l'Université Lille 1, 12/2015, URL
BENABOU Abdelkader

Educational Books

[1]   CAO en génie électrique
Techniques de l'Ingénieur, N°. D3585 v2, 08/2021, URL, Abstract
TOUNZI Abdelmounaïm, BENABOU Abdelkader, GILLON Frédéric

PhD Thesis

[1]   Contribution Ă  la caractĂ©risation et Ă  la modĂ©lisation de matĂ©riaux magnĂ©tiques en vue d’une implantation dans un code de calcul de champ
Université des Sciences et Technologies de Lille, 12/2002
BENABOU Abdelkader